Thermometer Movement with Hand – Two Shaft Sizes

Thermometer Movement – Great for Replacements and Repair or Creating a New Thermometer

This thermometer movement is designed to measure temperature using a bi-metal coil (no electronics or battery required). It includes a side adjustment wheel to fine-tune the hand position, with increase/decrease arrows clearly marked on the back.

• Temperature Range:
• Fahrenheit: -40° to 165°
• Celsius: -40° to 74°
• No Power Source Needed

Case Dimensions

These measurements help you determine if the movement will fit your clock case or dial:

• Front Diameter: 1-3/4″
• Back Diameter: 1-9/16″
• Thickness: 11/16″

Shaft Details

The shaft goes through the back of your dial and holds the movement in place with a mounting nut. Choose the right shaft length based on your dial thickness and whether your clock has a glass cover.

• Shaft Diameter: 5/16″

• Short Shaft:   Threaded Length: 3/8″ – Total Length: 1/2″

• Medium Shaft: Threaded Length: 9/16″ – Total Length: 7/8″

Tip: If the shaft is slightly too long for your setup, you can add washers between the movement and the dial to adjust the fit.

Hand Sizes

Choose the hand size that best fits your dial layout. These are measured from the center hole to the tip:

• 5-1/4″ Hand: 7-1/2″ overall length
• 6″ Hand: 7-3/4″ overall length

Tip: This movement has an “I” shaft so most clock minute hands will work. If you need a different size hand a standard clock hand is a good option. Hands larger than 10” are not recommended,

• This movement is ideal for DIY clock repairs or custom builds.
• No battery means fewer parts to maintain.
• It has a built-in hanger, but it doesn’t have to be used.
• Make sure your dial hole is the same or even a little larger than the shaft diameter of 5/16″