New 11-13/16" Round Clock Dial & Bezel for Mechanical Movement

New 11-13/16" Round Clock Dial & Bezel for Mechanical Movement
Click To Enlarge
  • Item #: C-326

This is a new, slight second, dial for a mechanical movement. The overall diameter is 11-13/16". Comes with a brass bezel around the outside that is already fixed in place. It is a slight second only because there are a few rub marks or small scratches on the numbers and one in the center. They are not noticeable. There is a chime slot that can be cut out on the back of the dial (see picture) and threaded screws that stick out so you can attach feet for mounting to your movement. We believe this dial would be used with a Hermle movement. Please read the following measurements and make sure it lines up with the posts on the front of your movement:

Center hole for your shaft is 10mm wide

The three winding holes below the center hole are each 3" apart (measurement is from the center of one hole to the center of the next hole)

The distance from the center shaft to the second bit hole above it is 1-3/8"

The distance from the center shaft to the winding key hole right below it is 1-11/16"


  * Marked fields are required.
Qty*
Price $49.95
Sale Price $24.97
Availability In-Stock
# Available 1