For Clocks Under 20" in Diameter

For Clocks Under 20" in Diameter
Click To Enlarge
  • Item #: MTP-30S.

MTP-30S
PENDULUM 

Please Read ALL of the Item Description Below
For Dials 20" or Smaller
This will only run up to a 10" minute hand. If your minute hand is longer than 10" (from center on hole to tip of hand) this will not work.  
THIS IS FOR TIMEWORKS CLOCKS - IF YOU NEED TO ORDER YOUR MOVEMENT IN A DIFFERENT SHAFT LENGTH OR IF YOU NEED TO ORDER IT WITH A PENDULUM PLEASE SEE THE LINK BELOW. 

These are not Timeworks brand movements and hands. These are replacement movements that come as close as possible to what Timeworks used in their clocks. Please pay careful attention to the sizes and pictures to make sure you are ordering the correct movement for you clock.

Case Size: 3"W x 3-1/2"H x 1"D -- This is the measurements of the movement itself

Shaft Diameter: 7/16"-- This is the post that sticks through the face of the clock - PLEASE MAKE SURE THE CENTER HOLE IN YOUR DIAL IS AT LEAST 7/16" IN DIAMETER. IT MAY NEED TO BE DRILLED BIGGER.

Shaft Length: 7/16" threaded part -- This needs to be long enough to go stick through the face of the clock and still have 1/8" for the hex nut that holds it in place.

Overall Shaft Length: 3/4" -- Overall length from where it starts on movement to the tip (Only necessary to know if you have glass on the face of your clock.) 

Battery: 1 'C' (not included)

This movement will run a pendulum up to 23" long. This will only run up to a 12" minute hand!

You will need to make sure that your minute hand has an oblong (rectangular) shape hole. 
If your minute hand has a round hole, please click the box underneath the red *marked fields are required* below and select a pair of our hands that comes close to what you need. Pictures are at the top of this page underneath the picture of the movement - click on the small picture and it will make it bigger so you can see the styles. Hand measurements are based on minute hand from center of hole to tip of hand. 
If your minute hand needs to be 7-10", you will have to purchase a pair of extra large battery hands in the size you need. Click on the link below to go to see the selection of large hands we carry: http://www.ronellclock.com/Extra-Large-Battery-Hands_c73.htm or see the Related Items to the right of this page.

**IF you have a VERY thick dial (face of the clock), please click on the link below and choose a longer shaft length from the drop down list.** http://www.ronellclock.com/searchquick-submit.sc?keywords=MTP-30

If you have any questions, please call us at 1-800-334-0135
 

  * Marked fields are required.
Qty*
Price $14.95
3 or more $14.50 each
6 or more $13.95 each
12 or more $13.50 each